Fall Arrest Protection

There are many scenarios where working at height is simply unavoidable and some of the most hazardous work sees operatives working on top of an elevated surface or structure. It’s here where selecting the correct fall arrest solution is critical. Jon Rowan, Product Line Manager at MSA Safety, explores where, when and how Self-Retracting Lifelines (SRLs) should be deployed for vertical fall arrest protection, and looks at the features that define the most reliable, robust and best lifetime-value equipment.

Despite significant advances in risk awareness and safety technology, falls from height remain a significant cause of injury and death. According to the HSE’s figures for fatal injuries in Great Britain for 2019-20, 29 workers suffered fatal injuries as a result of falling from height – that’s just over 26% of all UK fatalities in the workplace. Over the last five years, falls from a height have accounted for 26% of all fatal accident injuries (an average of 37 fatal injuries per year)[1]. Over 60% of deaths when working at height involve falls from ladders, scaffolds, working platforms, roof edges and falling through fragile roofs[2].

Hierarchy of control – identifying the situation

The hierarchy of fall protection is the starting point to determine what type of approach to working at height and/or fall protection system is required – and why.

  1. The preferred solution to all fall hazards is elimination.
  2. Passive fall protection: Physical barriers like guardrails around unprotected edges, for example.
  3. Fall restraint systems are erected in such a manner that a fall cannot occur. They use PPE to restrict the worker’s range of movement so they cannot physically travel to the fall hazard.
  4. Fall arrest systems are erected in such a manner that a fall can occur, but the fall is arrested within acceptable force and clearance margins. A suitable rescue procedure would then need to be implemented.

Why self-retracting lifelines?

One of the most effective and widely used fall arrest solutions today is the Self-Retracting Lifeline (SRL). Accounting for around a fifth of the 420 million Euro fall protection market[3], SRLs are replacing lanyards and rope grabs as they typically last longer, retract on movement, offer faster lock on and are easier to store.

A synthetic line or metallic cable attached to the worker’s harness automatically extends and retracts from a floor or overhead anchored container unit as the worker moves. In the event of a sudden fall, the product will ‘lock on’ to arrest the force of the fall, and an energy absorption system will then limit the impact of that force on the body of the worker in the harness.

SRL systems and the working environment

One of the first factors to consider when specifying the correct SRL system is the application and environment. What are the atmospheric conditions? In a coastal location, for instance, continuous exposure to saltwater vapour poses the risk of accelerated corrosion for metal parts. Similar corrosive hazards can be present in petrochemical sites, posing potential degradation risks for SRL plastics and composites. SRL specification options available from MSA, for example, include the use of sealed SRL casings, military-grade plastics and high-grade S4 stainless steel components that provide additional barriers against corrosion.

Understanding SRL anchors

An SRL is there to provide a fall arrest point. It will always be attached to an anchor which may be in different locations:

  • Overhead anchor point: this is the standard way to attach an SRL – to a carabiner or point above the workspace. This approach is traditionally seen when there has been an investment in infrastructure, and the benefit is that in the case of a slip or trip, there is less distance to fall.
  • Foot level anchor point: a foot or deck level tie off – positioned at foot level, with the SRL attached. This is a more common approach and is in many ways easier to use as nothing needs to be lifted overhead. However, it does mean that if the worker falls, the product is at a 90-degree angle to the fall. On many sites edges of roofs and structures can be sharp, so a foot level anchor must always be tested and ‘edge rated’.

Understanding your anchor point is the first step in making an appropriate product choice – you need to consider where the anchor is, how far it is away from the working point and how far away it is from the edge. Being conscious of fall clearance is also vital – having knowledge of distance means you can allow enough space for a fall to happen in the safest way possible. Once these things are understood, you can then make an informed choice on safety equipment, such as SRLs.

Match the solution to the application and value of product

There are a vast number of situations where fall protection is necessary, and it’s important to consider the individual differences between applications. For example, working with solar panels on a rooftop or servicing an aircraft wing will require care to prevent equipment causing damage. Using a synthetic web lifeline will minimise the risk of damaging products and surfaces. Conversely the presence of sharp edges that could sever a fabric line necessitates use of a high-grade steel cable. Similarly, a construction site may have abrasive concrete dust that will degrade synthetic lines, requiring a steel cabled solution.

SRLs are also inherently versatile and used across a wide range of industries and horizontal, overhead, and leading edge applications. From vertical access via pylons, turbines, water towers and confined spaces in general, to loading and maintenance bays, assembly lines, silos, rooftops and the building and construction industry at large, SRLs can help to take the guesswork out of equipment selection.

Another factor to consider is fall clearance – the minimum vertical distance required between a worker’s feet and a lower level, which can also vary at different points on the working area. A self-retracting lifeline can accommodate significant variance since it remains under tension and automatically adjusts the line. As an example, the latest addition to MSA Safety’s V-Series SRL range offers a new maximum line extension of 30m.

How quality design enhances lifetime performance and reduces cost

Ultimately, the design of an SRL directly impacts safety and whole service-life cost. Human life is priceless, and employers have a duty of care to reduce risks faced by their workers. While technically all products are certified to the same standard, the reality is that not all are created equal. Entry-level, economy priced PPE is much less likely to offer the same performance and durability as higher quality, more premium solutions.

Trying to minimise expenditure at the outset can be a false economy. Investing in the best equipment can yield lifetime savings and result in lower total cost of ownership. For example, equipment that is inherently designed to be serviceable in the field and minimise repair times can dramatically reduce costly downtime and delays. Smart retraction dampening technology which, in some instances can reduce cable retraction speed by up to 3m/s, can also not only increase safety but limit damage to the product and surroundings, thus minimising downtime and further maximising product lifespan.  

By placing this philosophy of quality front-of-mind, standard and leading edge SRLs by MSA Safety incorporate several innovative features in the V-Series range that add value. By fabricating the outer casing in clear, engineering-grade plastic, it’s easy to quickly inspect the drum and mechanism inside. For leading edge SRL products, an integrated roll cage protects housing when used in foot-level tie off. Internal components like the cable, energy absorber and retraction dampener can be replaced on site – reducing maintenance and repair times and eliminating the need for holding backup devices. The energy-absorbing technology also requires no additional calibration or adjustment, whilst retraction dampening limits the cable speed protecting internal parts from wear and damage.

Making safety a mission

For more than 105 years, MSA’s mission has centred around developing protection solutions that allow employees to return home safely at the end of every working day. Our portfolio of products has been considered and developed carefully, over time, listening to the industry and responding to their challenges and concerns.

To optimise your investment whilst ensuring workers enjoy access to versatile, best-of-breed protection whatever the job, it always pays to scrutinise the quality and pedigree of PPE.

The all-new MSA V-TEC® 30m SRL

The V-TEC 30m SRL completes MSA’s V-TEC range of overhead SRLs. This 30m product is an extension of the existing range of SRLs. A patented radial energy absorber technology is utilised along with clear windows for inspection, retraction dampening and In Situ maintenance to round off the portfolio in style.

The innovative 30M SRL brings with it ease of use, effortless maintenance and low total cost of ownership – adding value to any fall protection eco-system.

To find out more go to: bit.ly/V-TECSRL


[1] Health and Safety Executive, Fatal injuries in Great Britain

[2] Health and Safety Executive, Working at height

[3] Frost and Sullivan, Analysis of Western European Fall Protection Market, Forecast to 2021