Open HSI menu
Subscribe Login

Home / Articles and Press Releases / Article / Planning Pays Off

CATEGORIES

  • Latest Issue
  • Above The Neck Protection
  • Chemical Protection
  • Confined Space
  • Construction
  • Emergency Procedures
  • Energy, Oil and Mining Industries
  • Eye Protection
  • Fall Protection
  • Gas Detection
  • Hand Protection
  • Hazardous and Explosive Atmospheres
  • Health and Safety Awareness
  • Hearing Protection
  • Heat and Flame
  • Lighting and ATEX
  • Noise Monitoring
  • Personal Protective Equipment
  • Respiratory Protection
  • Safety Footwear
  • Safety Technology
  • Safety Training
  • Slips, Trips and Falls
  • Wellbeing at Work
  • Working at Height
  • Working Rights

MORE

  • Press Releases
  • Events
  • Videos
  • Webinars
  • Magazines

COMPANY

  • About
  • Advertising
  • Newsletter
  • Contact
Open HSI menu
Subscribe

Home / Articles and Press Releases / Article / Planning Pays Off

CATEGORIES

  • Latest Issue
  • Above The Neck Protection
  • Chemical Protection
  • Confined Space
  • Construction
  • Emergency Procedures
  • Energy, Oil and Mining Industries
  • Eye Protection
  • Fall Protection
  • Gas Detection
  • Hand Protection
  • Hazardous and Explosive Atmospheres
  • Health and Safety Awareness
  • Hearing Protection
  • Heat and Flame
  • Lighting and ATEX
  • Noise Monitoring
  • Personal Protective Equipment
  • Respiratory Protection
  • Safety Footwear
  • Safety Technology
  • Safety Training
  • Slips, Trips and Falls
  • Wellbeing at Work
  • Working at Height
  • Working Rights

MORE

  • Press Releases
  • Events
  • Videos
  • Webinars
  • Magazines

COMPANY

  • About
  • Advertising
  • Newsletter
  • Contact

CATEGORIES

  • Article
  • Press Release
  • Above The Neck Protection
  • Chemical Protection
  • Confined Space
  • Construction
  • Emergency Procedures
  • Energy, Oil and Mining Industries
  • Eye Protection
  • Fall Protection
  • Gas Detection
  • Hand Protection
  • Hazardous and Explosive Atmospheres
  • Health and Safety Awareness
  • Hearing Protection
  • Heat and Flame
  • Lighting and ATEX
  • Noise Monitoring
  • Personal Protective Equipment
  • Respiratory Protection
  • Safety Footwear
  • Safety Technology
  • Safety Training
  • Slips, Trips and Falls
  • Wellbeing at Work
  • White Papers
  • Working at Height
  • Working Rights

Article

Planning Pays Off

By Guy Schaller

| Read Bio

Published: January 08th, 2009

Share this article

Falls while working at height are all too common; the greater tragedy is that each fall is preventable. With around 2.3 million work-related deaths worldwide annually, with the construction industry accounting for about 60,000 of these fatalities, fall protection is moving higher up the agenda globally. As a contractor, you are in charge of protecting your workers. When it comes to fall protection, equipment isn’t enough.

Most health and safety managers are aware that assessment for, and the provision of, fall protection equipment is a requirement for workers performing tasks as soon as they either leave the ground or are near an excavation. Many facilities have the appropriate equipment in place to prevent or control a fall. But having the equipment and making sure workers use it is not enough. A fall protection and rescue plan needs to be

in place to truly protect you, your workers and your company. Guy Schaller discusses the benefits of developing and implementing a fall protection and rescue plan, including injury prevention, monetary savings and the advantages of being a proactive company that is serious about the safety of its employees.

Injury and death prevention

A contractor’s utmost concern must be keeping workers safe. Having a fall protection and rescue plan in place prior to beginning a job gives contractors the time to analyse and prepare for the fall hazards that a worker may face. If the plan is developed in advance, you can be methodical about how to best prevent a fall. You have the time to train your workers on the ground and be sure they are fully prepared for the hazardous situations before they go to work at heights.

Active fall protection gear – a harness, connector and anchorage – can eliminate the chance of serious injury when workers learn how to properly wear the gear according to its specifications, use it properly and conduct regular inspection and maintenance procedures. A passive fall protection system – such as guardrails, permanent netting and barriers – can help eliminate injuries by keeping the worker from coming into contact with the fall hazard. Without a fall protection plan, you may not know a fall hazard exists, let alone whether an active or passive system is appropriate to control the fall hazard.

Monetary savings

When you have a plan in place, cost savings come in several forms. A plan saves money because you are prepared: You know what fall protection equipment and skills will be needed at each fall hazard on the jobsite. This enables you to make considered equipment decisions for a job well in advance, rather than quickly buying products a few days before the job begins. In some situations, you may not be able to purchase the desired equipment in time, which can delay the work or put your workers in danger.

Training costs can be reduced by having planned sequential training sessions that give your workers time on the ground to fully understand the proper use of the fall protection equipment and rescue systems that will be used at the site. Planned sessions better prepare your workers rather than quick unplanned briefs right before a job begins, which are not as complete and can delay construction. Quality training will help prevent falls from occurring and ensure workers are better prepared if a fall were to happen.

The amount of money a company can save on insurance costs, injury compensation claims and increased productivity with a fall protection and rescue plan in place is invaluable. Fewer injuries lead to fewer workers compensation claims, which will lower insurance costs immensely. Reduction in lost time from worker falls and injuries also allows a company to be more productive and keep on-site work progressing to schedule.

Advantages of being a proactive company that is serious about the safety of its employees

A fall protection and rescue plan stands as evidence that your company is doing everything it can to prevent injuries, which is something both employees and regulatory bodies will recognise. It shows your employees that you genuinely care about their safety, that you’re ensuring their safe return home at the end of each day.

Providing a high-quality fall protection and rescue plan can help form positive attitudes about using fall protection equipment, encouraging workers to spend more time making sure they are wearing and using the equipment properly.

A company’s reputation is its strongest asset. Citations and injuries aren’t good for business development or employee recruitment. When your company is diligent in following fall protection standards, injuries will decrease. Should an incident occur, however, a more favorable attitude from regulators could result based on your consistent efforts to comply with regulations and prevent falls.

A fall protection programme

A fall protection programme not only reduces worker risk, it demonstrates that the company is making an effort to comply with regulations, which can prevent potential economic losses resulting from a fall, including fines, liability and increased insurance costs. The following shows the six key steps to consider when developing and implementing a comprehensive fall protection programme.

Step 1: Develop a policy and define the scope of the programme

Managers in charge of developing a fall protection programme for a company must develop a policy that is in line with existing company safety policies. The scope defines who the policy applies to, types of activities the policy applies to, locations where the policy is in force, date the policy entered into force, duties and responsibilities of those involved in the fall protection programme and delegation of those duties and responsibilities. Ongoing responsibilities include inspection, record keeping, maintenance, equipment replacement, incident reporting, enforcement, accident investigation, training and changes to the plan.

Step 2: Identify fall hazards through a hazard analysis

A hazard analysis, or fall hazard survey, is a key step in the development of a fall protection programme. It identifies each fall hazard that exists at the facility and any other locations the policy covers. Along with the location of each fall hazard, the analysis should include the type of hazard, a sketch of the hazard, how often workers are exposed to the hazard, duration of exposure, height of a potential fall, control method (see step 3), fall protection and rescue equipment to be used at the site of the hazard (if applicable), and environmental conditions that could affect selection of appropriate fall protection equipment. Environmental conditions might include presence of chemicals, sparks or flames, sharp or abrasive objects/surfaces, moving objects, and unstable/uneven/slippery surfaces, among others.

Step 3: Determine appropriate methods of control

The fall protection hierarchy details the preferred methods of controlling a fall hazard. The ultimate control method is to engineer out the hazard, which is usually only an option during the design stage of a new facility. The next best control is to change work procedures so that workers are not exposed to the hazard. If an area must be accessed, the best control is to install passive fall protection systems such as guardrails, handrails and covers for floor openings. If passive fall protection is not a possibility, fall restraint systems that prevent the worker’s centre of gravity from reaching the fall hazard should be used. Extra diligence must be exercised with restraint systems because they do not double as fall arrest systems; a restraint lanyard will not reduce the forces of a fall. If none of the above methods will suffice, a fall arrest system, which is designed to reduce the forces of a fall, should be used.

Whenever a fall arrest system is in place, a rescue plan must also be in place. The potential for injuries necessitates timely rescue. The injury may have been the cause of the fall, or an injury may have occurred during the progress of the fall. Furthermore, a worker hanging in a harness may suffer from suspension trauma, a condition in which lack of motion and constricted veins may cause blood to pool. Suspension trauma does not always result in long-term injuries, but the possibility demands prompt response. The most important elements of the rescue plan are identification of the rescuer, that is, who will perform the rescue (in-house personnel, emergency services or a combination of the two), and what type of rescue system or equipment will be used at each fall hazard. Rescue should be as simple and as safe as possible.

Step 4: Conduct education and training sessions to ensure effective employee understanding of fall hazards and control methods

Classroom education for authorised persons – workers that will be exposed to fall hazards on a regular basis – should begin with coursework that teaches the trainee how to recognise fall hazards, how to eliminate or control fall hazards, relevant applicable regulations and the worker’s responsibilities under those standards, and how to use written fall protection procedures. A more hands-on portion of training should include how to select, inspect, use, store and maintain fall protection equipment.

Training should occur whenever a new employee is brought on board, and periodic assessments of employees’ knowledge and skills – including written assessments and skills demonstrations – should be conducted at least annually. Standards require refresher training every two years at a minimum, sooner if the work place changes, new systems/equipment are issued, or the worker doesn’t display adequate knowledge.

Step 5: Perform inspection and maintenance of fall protection equipment

Equipment should be inspected prior to and following each use. When inspecting equipment, ensure all required markings and labels are present and legible; make sure all elements affecting equipment form, fit and function are present; and look for evidence of defects in or damage to hardware, straps, rope or cable, mechanical devices and connectors, including evidence that the equipment has been subjected to a fall event.

Equipment must pass a more rigorous inspection according to the timeline set by the manufacturer. A supervisor or safety manager (programme administrator, qualified or competent person) should inspect each piece of equipment according to the manufacturer’s instructions and record the date of inspection and condition of each piece of equipment. Certain items, such as self retracting lifelines, must be sent to an authorised repair facility for servicing and recertification.

Step 6: Administer and audit the programme for compliance and continuous improvement

Should a fall or near-miss occur, the manager or supervisor should conduct an incident investigation, the results of which should be recorded and kept on file. Investigations will help determine if the fall protection programme has established the appropriate control method for a given hazard, if the training is adequate, and what improvements are needed to ensure such an incident doesn’t occur again.

The fall protection programme must be updated every time an investigation results in a recommendation for improvement, and whenever a new fall hazard is identified or an existing hazard is modified. A copy of the fall protection programme should be kept wherever an active fall protection system is in use.

In conclusion, keeping your fall protection and rescue plan up-to-date, active and rehearsed, so workers can respond in a timely manner in the event of a fall, is priceless. It is much better to plan ahead from a thorough perspective than to plan in haste. Be prepared from the ground up and do everything that you can to ensure the safety of your employees.

Author

Guy Schaller, Managing Director, Capital Safety

Capital Safety, the world’s leading designer and manufacturer of height safety and fall protection equipment with 9 operating sites worldwide, is home of the DBI-SALA and PROTECTA brands. All of Capital Safety’s fall protection and rescue systems are backed by the best training, technical assistance and customer service in the industry.

Tel: + 33 (0)4 97 10 00 10 or visit www.capitalsafety.co

Published: 01st Aug 2009 in Health and Safety Middle East

Share this article

ABOUT THE AUTHOR

Guy Schaller

Connect with Guy Schaller

POPULAR POSTS BY Guy Schaller

Article

Planning Pays Off

Get email updates

Sign up for the HSI newsletter

Keep up-to-date through the power of email with Europe's largest audited safety magazine - delivering the latest news and products to satisfy all your occupational safety needs.
  • This field is for validation purposes and should be left unchanged.

FEATURED ARTICLES

Article

 Thameslink Traffic Management Programme

Press Release

‘Working At Height’ Remains Biggest Danger

Press Release

“Uncertainty and Ignorance” Risks More Asbestos Deaths

Advertisement

SOCIAL MEDIA

HSI on Facebook

https://www.facebook.com/HSIMagazine/

Advertisement

SOCIAL MEDIA

HSI on Twitter

hsimagazine HSI Magazine @hsimagazine ·
25 Jan

Global gas sensing leader @ionscience has today formally announced the addition of a high-specification Particulate Matter (PM) sensor to its portfolio.

Read all about this exciting addition!
https://www.hsimagazine.com/press-release/worlds-best-performing-particulate-matter-pm-sensor-now-available-from-ion-science-ltd/

#hsimagazine #ionscience #particulatematter

Reply on Twitter 1618280038557970432 Retweet on Twitter 1618280038557970432 Like on Twitter 1618280038557970432 Twitter 1618280038557970432

Advertisement

SUBSCRIBE

Stay up to date with our newsletter

    • Keep up-to-date with Europe’s largest audited safety magazine

 

    • Delivering the latest news and products to satisfy all your occupational safety needs

 

This field is for validation purposes and should be left unchanged.

Subscribe

SUBSCRIBE TO HSI MAGAZINE

5 reasons to subscribe to our digital and print package

  • Stay up to date from anywhere in the world, with instant access to the latest issue straight from your phone, tablet or laptop.
  • Trust that you’re getting the best content from our range of internationally accredited authors.
  • Get full access to our archives and see how occupational safety has evolved with us over the years.
  • Enjoy our monthly newsletter curated with up-to-the-minute news and a selection of editor’s top picks.
  • Hot off the press and straight to your door – look forward to your own glossy copy of HSI, delivered five times a year
Subscribe View Subscription levels

STAY SAFE & INFORMED

Subscribe to the best health & safety articles, news, products and regulations

Find out more

Stay up to date with our newsletter

  • This field is for validation purposes and should be left unchanged.

ABOUT

  • About HSI International
  • Advertise
  • Contact Us

YOUR ACCOUNT

Sign In Register Account Subscribe to HSI

RESOURCES

Request Media Pack

CONNECT

ACCREDITATIONS

Copyright Bay Publishing 2023. All Rights reserved.

Designed & Built by:
  • Terms & Conditions
  • Privacy Policy
  • Cookie Policy
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
Cookie settingsACCEPT
Manage consent

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
CookieDurationDescription
cookielawinfo-checbox-analytics11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional11 monthsThe cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy11 monthsThe cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytics
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
Advertisement
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
Others
Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
SAVE & ACCEPT